9 serie buiten LED Kerstmis lichte keten 3D-sterren /kerstlichten-wit

Die led-weihnachtslichtet "3D-Sterne-Weiß" Verziert Ihr zuHause mit 9 Weißen, Leuchtenden 3d Sternen. Durch Ihre Niedrige Lichtfarbe (2800K) Strahlt Die Lichtette Ein Antenehmes, verwarmt Weiß Aus und sorgt damit für BezaUbernde Weihnachttsabende. Diese Lichtette ist mit Ihrer Hohen Schutzart (IP44) Auch Gegen Spritzwasser Geschützt und Eignet Sich Daher Auch Zum Verschönern des Außenbereichs. Die Lichtette hoed eine Gesamtlänge von 5 m. Die Sterne Sind Jeweils 30 cm von voneinander entfernt.
Breedte: 9cm
Hoogte: 10.5cm
Lengte: 740cm
Gewicht: 0g
kleuren: Wit
Materialen: Plastic
merk: Näve Leuchten
Gemaakt in: CN
EAN/streepjescode: 4003222880838
SKU: 5260223

Fabrikant informatie: Näve - Leuchten Gesellschaft mit beschränkter Haftung
Austraße 5
74670 Forchtenberg DE
info@naeve.de
Veiligheidsinformatie: Safety instructions Electrical connections may only be carried out by expert staff.The manufactures do not accept responsibility for injuries or defects caused by improper use of a luminaire. The lamp is only for indoor using.Attention! Before beginning any work on the lamp, disconnect it from the mains power line by removing the fuse or unplugging the power plug. This also applies to cleaning,maintenance and replacing bulbs. Prior to starting installation work, de-energise the power line – remove the fuse and/or set the switch to “OFF. Lamps with transformers Lamps become very hot in the area of the lighting point. Therefore, never touch the lamp when it is switched on or still hot. RISK OF INJURY FROM BURNS!The bulb may be replaced only by competent personnel. Use only bulbs of the same type and voltage rating.Lamps are not toys. Children frequently do not recognize the dangers associated with electric appliances or their packaging. Therefore, you should keep them away fromchildren. If you give this lamp to someone else, always include these instructions. If the lamp is damaged, in particular the cord or lamp socket, discontinue use of the lamp immediately. In the event of a malfunction, always have the lamp repaired by a qualified electrician. Never attempt to repair the lamp yourself. Improper repairs can endanger the safety of the user.Protection class I . This luminaire must be connected with its protective conductor (green-yellow wire) to the protective earth-terminal.Protection class II . This luminaire is particulary isolatet and must not be conectet to a protective earth-terminal.Pay attention to the fact that electric lines are not damaged during installation.Designation of connecting terminals. L – phase, N – neutral conductor, - protective conductor. The given mains voltage may not be exceeded.Minimum clearance between emitter edge and floodlighted surface >= 0,5 m.Only replace defective lamps by lamps of the same design, wattage and voltage.The care of luminaries is restricted to their surfaces. Use only a dry cloth. Wetness must not get into wiring spaces or to current-carrying parts.Plug and connection elements must be free of train and trick strength.