LED-plafondlamp met kristaloptica "Leeds", zijlengte 25 cm, gemaakt van chroomkleurig metaal en helder, gestructureerd glas, geïntegreerde LED's, warm wit

Het opwindende LED -plafondlicht "Leeds" glinstert indrukwekkend met zijn glazen kristallen en een 60 LED -plaat van het SMD 2835 -type bij 1000 lm en 12 W in totaal. Dit metalen en glazen pronkstuk heeft een breedte van 25 cm en een hoogte van 5,3 cm. Met name energie die door de energie -efficiëntie Klasse A+is, kunt u genieten van uw warme witte licht van 3000 K.
Breedte: 25cm
Hoogte: 5.3cm
Lengte: 25cm
Gewicht: 1g
Materialen: Metaal, Glas
merk: Näve Leuchten
EAN/streepjescode: 4003222835432
SKU: 1200731

Fabrikant informatie: Näve - Leuchten Gesellschaft mit beschränkter Haftung
Austraße 5
74670 Forchtenberg DE
info@naeve.de
Veiligheidsinformatie: Safety instructions Electrical connections may only be carried out by expert staff.The manufactures do not accept responsibility for injuries or defects caused by improper use of a luminaire. The lamp is only for indoor using.Attention! Before beginning any work on the lamp, disconnect it from the mains power line by removing the fuse or unplugging the power plug. This also applies to cleaning,maintenance and replacing bulbs. Prior to starting installation work, de-energise the power line – remove the fuse and/or set the switch to “OFF. Lamps with transformers Lamps become very hot in the area of the lighting point. Therefore, never touch the lamp when it is switched on or still hot. RISK OF INJURY FROM BURNS!The bulb may be replaced only by competent personnel. Use only bulbs of the same type and voltage rating.Lamps are not toys. Children frequently do not recognize the dangers associated with electric appliances or their packaging. Therefore, you should keep them away fromchildren. If you give this lamp to someone else, always include these instructions. If the lamp is damaged, in particular the cord or lamp socket, discontinue use of the lamp immediately. In the event of a malfunction, always have the lamp repaired by a qualified electrician. Never attempt to repair the lamp yourself. Improper repairs can endanger the safety of the user.Protection class I . This luminaire must be connected with its protective conductor (green-yellow wire) to the protective earth-terminal.Protection class II . This luminaire is particulary isolatet and must not be conectet to a protective earth-terminal.Pay attention to the fact that electric lines are not damaged during installation.Designation of connecting terminals. L – phase, N – neutral conductor, - protective conductor. The given mains voltage may not be exceeded.Minimum clearance between emitter edge and floodlighted surface >= 0,5 m.Only replace defective lamps by lamps of the same design, wattage and voltage.The care of luminaries is restricted to their surfaces. Use only a dry cloth. Wetness must not get into wiring spaces or to current-carrying parts.Plug and connection elements must be free of train and trick strength.